C_TSCM42_66日本語、C-TFIN52-64日本語試験情報
Pass4Testが提供した教育資料は真実のテストに非常に近くて、あなたが弊社の短期の特殊訓練問題を通じてすぐにIT専門の知識を身につけられます。弊社は君の試験の100%合格率を保証いたします。
購入前にPass4Testが提供した無料の問題集をダウンロードできます。自分の練習を通して、試験のまえにうろたえないでしょう。Pass4Testを選択して専門性の訓練が君の試験によいだと思います。
今の人材が多い社会中に多くの業界は人材不足でたとえばIT業界はかなり技術的な人材が不足で、SAPのC_TSCM42_66認定試験はIT技術の認証試験の1つで、Pass4TestはSAPのC_TSCM42_66認証試験に関するの特別な技術を持ってサイトでございます。
試験科目:「SAP Certified Application Associate - Production - Planning & Manufacturing with SAP ERP 6.0 EHP6」
一年間無料で問題集をアップデートするサービスを提供いたします
最近更新時間:2015-08-16
問題と解答:全80問 C_TSCM42_66 資格練習
試験科目:「SAP Certified Application Associate - Financial Accounting with SAP ERP 6.0 EHP4 (C-TFIN52-64日本語版)」
一年間無料で問題集をアップデートするサービスを提供いたします
最近更新時間:2015-08-16
問題と解答:全80問 C-TFIN52-64日本語 対応受験
今の競争の激しいIT業界ではSAPのC_TSCM42_66試験にパスした方はメリットがおおくなります。給料もほかの人と比べて高くて仕事の内容も豊富です。でも、この試験はそれほど簡単ではありません。
アンケート調査によると、IT業種の皆さんが現在最も受験したい認定試験はSAPのC_TSCM42_66試験だそうです。確かに、この試験はとても大切な試験で、公的に認可されたものです。しかも、この認定資格があなたが高い技能を身につけていることも証明できます。しかしながら、試験の大切さと同じ、この試験も非常に難しいです。試験に合格するのは少し大変ですが、心配しないでくださいよ。Pass4Testはあなたに難しいC_TSCM42_66認定試験に合格することを助けてあげますから。
Pass4Testが提供したSAPのC_TSCM42_66トレーニング資料を利用してから試験に合格することがとてもたやすことになって、これは今までがないことです。これは試験に合格した受験生の一人が言ったのです。Pass4Testが提供したSAPのC_TSCM42_66トレーニング資料はあなたの雑然とした考えを整理できます。そうしたらあなたは心理的なストレスを減らせるだけでなく、気楽に試験に受かることもできます。Pass4Testには一部の問題と解答を無料に提供して差し上げますから、もし私の話を信じないのなら、試用版を使ってみてください。利用してみたら効果があるかどうか自分でよく知っているようになります。あなたに絶対向いていると信じていますよ。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード:http://www.pass4test.jp/C_TSCM42_66.html
NO.1 In the Customizing for requirements planning, a project team notices that the alternatives P1,
P2, P3 and P4 are also delivered as standard in addition to MRP type PD. The number in each of
these alternatives represents a firming type.
What does a firming type define?(Choose two)
A. Handling existing procurement proposals outside the planning time fence.
B. Handling existing procurement proposals within a planning time fence.
C. Handling new requirements within the planning time fence.
D. Handling new procurement proposals that need to be created due to new requirements within
the planning time fence.
Answer: B,D
SAP全真模擬試験 C_TSCM42_66特典 C_TSCM42_66返金 C_TSCM42_66 C_TSCM42_66監査ツール
NO.2 Which of the following master data can be used with process orders?(Choose three)
A. Serial numbers
B. Master recipes
C. Resources
D. Production/resource tools
E. Production versions
Answer: B,C,E
SAP C_TSCM42_66開発入門 C_TSCM42_66模試エンジン C_TSCM42_66ソートキー
NO.3 You want to use the function "Read PP master data" in the production order.
However, while calling the function you receive an error message.
What could be the reason?
A. The material availability check has been performed.
B. Goods movements have been posted.
C. The production order has been released.
D. Order papers have been printed.
Answer: B
SAP C_TSCM42_66日本語講座 C_TSCM42_66勉強法 C_TSCM42_66最新版
NO.4 Which types of objects can be changed with Engineering Change Management (ECM)?(Choose
three)
A. Task list
B. Work center
C. Production version
D. Bill of material
E. Material master
Answer: A,D,E
SAP認定デベロッパー C_TSCM42_66目的 C_TSCM42_66 C_TSCM42_66独学 C_TSCM42_66一発合格
NO.5 Which objects can affect the calculation of capacity requirements for an operation?(Choose
three)
A. Standard values (routing)
B. In-house production time (material master)
C. Transport time (routing)
D. Formulas (work center)
E. Operation control key (routing)
Answer: A,D,E
SAP関節 C_TSCM42_66過去問 C_TSCM42_66スクール
NO.6 You want to use the different options for planning in SAP ECC.
What is the correct sequence of the planning procedures?
A. Sales and operations planning -> Demand management -> Long-term planning -> Material
requirements planning -> Capacity planning
B. Demand management -> Sales and operations planning -> Capacity planning -> Long-term
planning -> Material requirements planning
C. Material requirements planning -> Demand management -> Sales and operations planning ->
Long-term planning -> Capacity planning
D. Long-term planning -> Sales and operations planning -> Demand management -> Material
requirements planning -> Capacity planning
Answer: A
SAP信頼度 C_TSCM42_66改訂 C_TSCM42_66ディレクトリ同期 C_TSCM42_66 C_TSCM42_66短期
NO.7 The final assembly of a finished product should only be triggered when a customer order
arrives.
Which planning strategy for the finished product do you use?
A. Planning with make-to-stock (strategy 10)
B. Planning at the assembly level (strategy 70)
C. Planning without final assembly (strategy 50)
D. Planning with final assembly (strategy 40)
Answer: C
SAP C_TSCM42_66対象者 C_TSCM42_66返金 C_TSCM42_66学習資料
NO.8 Which of the following scheduling types can only be used in capacity planning?
A. Midpoint
B. Forward
C. Only capacity requirements
D. Backward
Answer: A
SAP最新試験 C_TSCM42_66割引 C_TSCM42_66
コメント 0