1Y0-A28試験過去問、1Y0-A19日本語参考書

IT業界の中でたくさんの野心的な専門家がいって、IT業界の中でより一層頂上まで一歩更に近く立ちたくてCitrixの1Y0-A28試験に参加して認可を得たくて、Citrix の1Y0-A28試験が難度の高いので合格率も比較的低いです。Pass4Testの商品は試験問題を広くカーバして、認証試験の受験生が便利を提供し、しかも正確率100%です。そして、試験を安心に参加してください。

Pass4TestのIT認証試験問題集は長年のトレーニング経験を持っています。Pass4Test Citrixの1Y0-A19日本語試験トレーニング資料は信頼できる製品です。当社のスタッフ は受験生の皆様が試験で高い点数を取ることを保証できるように、巨大な努力をして皆様に最新版の1Y0-A19日本語試験トレーニング資料を提供しています。Pass4Test Citrixの1Y0-A19日本語試験材料は最も実用的なIT認定材料を提供することを確認することができます。

IT領域での主要な問題が質と実用性が欠くということを我々ははっきり知っています。Pass4TestのCitrixの1Y0-A28の試験問題と解答はあなたが必要とした一切の試験トレーニング資料を準備して差し上げます。実際の試験のシナリオと一致で、选択問題（多肢選択問題）はあなたが試験を受かるために有効な助けになれます。Pass4TestのCitrixの1Y0-A28「Implementing NetScaler 10 for Networking and Traffic Optimization」の試験トレーニング資料は検証した試験資料で、Pass4Testの専門的な実践経験に含まれています。

試験番号：1Y0-A28
試験科目：「Implementing NetScaler 10 for Networking and Traffic Optimization」
一年間無料で問題集をアップデートするサービスを提供いたします
最近更新時間：2015-03-04
問題と解答：全123問 1Y0-A28 資格取得講座

>>詳しい紹介はこちら

 

試験番号：1Y0-A19日本語
試験科目：「Citrix XenDesktop 5 Basic Administration (1Y0-A19日本語版)」
一年間無料で問題集をアップデートするサービスを提供いたします
最近更新時間：2015-03-04
問題と解答：全90問 1Y0-A19日本語 試験準備

>>詳しい紹介はこちら

 

Pass4Testはその近道を提供し、君の多くの時間と労力も節約します。Pass4TestはCitrixの1Y0-A28認定試験に向けてもっともよい問題集を研究しています。もしほかのホームページに弊社みたいな問題集を見れば、あとでみ続けて、弊社の商品を盗作することとよくわかります。Pass4Testが提供した資料は最も全面的で、しかも更新の最も速いです。

今の多士済々な社会の中で、IT専門人士はとても人気がありますが、競争も大きいです。だからいろいろな方は試験を借って、自分の社会の地位を固めたいです。1Y0-A19日本語認定試験はCitrixの中に重要な認証試験の一つですが、Pass4TestにIT業界のエリートのグループがあって、彼達は自分の経験と専門知識を使ってCitrix 1Y0-A19日本語「Citrix XenDesktop 5 Basic Administration (1Y0-A19日本語版)」認証試験に参加する方に対して問題集を研究続けています。　

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.pass4test.jp/1Y0-A28.html

NO.1 What should a network engineer do to prevent unauthorized users from using the root user
account?
A. Reset the nsroot account.
B. Change the nsroot password.
C. Create an authorization policy.
D. Bind a policy to the root user account.
Answer: B

Citrix日本語版   1Y0-A28保証   1Y0-A28知識   1Y0-A28勉強法

NO.2 An engineer has two NetScaler devices in two different datacenters and wants to create a high
availability (HA) pair with the two devices, even though they are on two different subnets.
How can the engineer configure the HA Pair between the two NetScaler devices?
A. Configure StaySecondary on the second datacenter appliance.
B. Ensure that INC mode is enabled during the creation of the HA Pair.
C. Enable the HAMonitors on all interfaces after the HA Pair has been created.
D. Change the NSIP of the second appliance to be on the same subnet as the first appliance.
Answer: B

Citrixアクセスリスト   1Y0-A28書籍   1Y0-A28   1Y0-A28参考書

NO.3 The network engineer would like all HTTP and HTTPS requests that travel through the
NetScaler to have an HTTP header added with the source IP address for logging on the web servers.
How should the network engineer accomplish this?
A. Enable Web Logging
B. Enable the client IP option
C. Configure the TCP Parameters
D. Enable the 'Use Source IP mode'
Answer: B

Citrix方法   1Y0-A28   1Y0-A28模擬   1Y0-A28
6. A network engineer has configured two NetScaler MPX appliances as a high availability (HA)
pair.
What can the engineer configure to prevent failover if only a single interface fails?
A. FIS
B. PBR
C. SNMP
D. VMAC
Answer: A

Citrix真実試験   1Y0-A28キャッシュ   1Y0-A28独学   1Y0-A28内容
7. Scenario: A NetScaler appliance currently has a manually configured channel containing four
interfaces;
however, the engineer has been told that the NetScaler must now only use a single interface for this
network.
The engineer removes the channel and immediately notices a decrease in network performance.
How could the engineer resolve this issue?
A. Reset the unused interfaces
B. Disable the unused interfaces
C. Enable flow control on all interfaces
D. Disable HA monitoring on the three interfaces that are no longer required
Answer: B

Citrix   1Y0-A28フリーク   1Y0-A28難易度
8. Scenario: A NetScaler engineer needs to enable access to some web servers running on an
IPv6-only network. The clients connecting
the services are
on an IPv4 network. The
engineer has already enabled IPv6 on the NetScaler. What does the engineer need to do in order to
provide access to the services on the IPv6 network?
A. Create an IPv6 tunnel and a IPv4 virtual server.
B. Configure an IPv6 VLAN and bind the required interface.
C. Create a IPv4 virtual server and bind the service group to it.
D. Create an IPv6 ACL and a IPv4 virtual server and bind the ACL to the virtual server.
Answer: C

Citrix科目対策   1Y0-A28日本語講座   1Y0-A28試験内容   1Y0-A28リンクグローバル   1Y0-A28模擬
9. Scenario: An engineer executes the following commands: add vlan 2 bind vlan 2 -ifnum 1 / 2 add
ns ip 10.110.4.200 255.255.255.0 bind vlan 2 -IPAddress 10.110.4.200 255.255.255.0 What type of
IP address has been added to the NetScaler?
A. VIP address
B. NSIP address
C. SNIP address
D. GSLB Site IP address
Answer: C

Citrix受験料   1Y0-A28購入   1Y0-A28   1Y0-A28認定デベロッパー   1Y0-A28内容   1Y0-A28割引
10. Scenario: A network engineer needs to configure Citrix NetScaler to provide Access Gateway
services to VLAN 2 using interface 1 /1 only, while also using interface 1 / 2 to provide load balancing
services to VLAN 3. How could this result be achieved?
A. Disable static route advertisement.
B. Disable layer 2 mode Create 2 untagged VLANs - VLAN 2 and VLAN 3 Bind VLAN 2 to Interface 1 /1
Bind VLAN 3 to Interface 1 / 2
C. Enable Layer 3 mode Create a Channel Interface using Interface 1 /1 and 1 / 2 Create 2 VMACs Bind
a VMAC to interface 1 /1 and 1 / 2
D. Configure policy-based routing using the Interface option as a filter.
Answer: B

Citrix問題と解答   1Y0-A28認証   1Y0-A28復習資料   1Y0-A28通信   1Y0-A28資格取得講座
11. Scenario: A network engineer needs to re-configure the NetScaler to utilize two new VLANs -
VLAN2 and VLAN3. VLAN2 is an untagged VLAN and VLAN3 will require a .1q compliant tag.
Interface 1 /1 is the only interface that
will be used on the NetScaler. How could the engineer configure
the NetScaler so that it can communicate with both networks?
A. Change the NSVLAN to 3 Add VLAN 2 and bind interface 1 /1 as untagged
B. Enable the Tag all VLANs option on interface 1 /1.
C. Add VLAN2 and bind interface 1 /1 as untagged Add VLAN3 and bind interface 1 /1 as tagged
D. Add a SNIP for each VLAN Enable management access on the SNIP for VLAN3
Answer: C

Citrix全真問題集   1Y0-A28バージョン   1Y0-A28対応受験   1Y0-A28教本
12. Why would an engineer want to specify a TCP Profile for a specific service group?
A. To enable use of features like SSL over TCP for that specific service group.
B. To adjust the TCP settings for traffic to and from that specific service group.
C. To use a specific SNIP for traffic to the back-end servers in that service group.
D. To enable features like use source IP , TCP keep alive and TCP buffering for a specific service group.
Answer: B

Citrix再テスト   1Y0-A28   1Y0-A28ブロンズ教材   1Y0-A28研修   1Y0-A28通信   1Y0-A28アクセスリスト

NO.4 Scenario: The NetScaler has connections to a large number of VPNs. The network engineer
wants to minimize
the number of ARP requests. Which feature should the network engineer enable to minimize ARP
requests?
A. TCP Buffering
B. Use Source IP
C. Edge Configuration
D. MAC based forwarding
Answer: D

Citrix取得   1Y0-A28プログラム   1Y0-A28特典   1Y0-A28   1Y0-A28信頼度   1Y0-A28開発入門

NO.5 A network engineer needs to upgrade both appliances of a High Availability (HA)
pair. In which order should the network engineer upgrade the appliances?
A. Disable high availability and upgrade one node at a time.
B. Upgrade the primary node first without disabling high availability.
C. Upgrade the secondary node first without disabling high availability.
D. Perform the upgrade simultaneously without disabling high availability.
Answer: C

Citrix一発合格   1Y0-A28入門   1Y0-A28クラムメディア   1Y0-A28真実試験