SSブログ

1Z1-820受験料、1z1-100クラムメディア

あなたのキャリアでいま挑戦に直面していますか。自分のスキルを向上させ、よりよく他の人に自分の能力を証明したいですか。昇進する機会を得たいですか。そうすると、はやく1Z1-820認定試験を申し込んで認証資格を取りましょう。Oracleの認定試験はIT領域における非常に大切な試験です。Oracleの1Z1-820認証資格を取得すると、あなたは大きなヘルプを得ることができます。では、どのようにはやく試験に合格するかを知りたいですか。Pass4Testの1Z1-820参考資料はあなたの目標を達成するのに役立ちます。


成功することが大変難しいと思っていますか。IT認定試験に合格するのは難しいと思いますか。今Oracleの1z1-100認定試験のためにため息をつくのでしょうか。実際にはそれは全く不要です。IT認定試験はあなたの思い通りに神秘的なものではありません。我々は適当なツールを使用して成功することができます。適切なツールを選択する限り、成功することは正に朝飯前のことです。どんなツールが最高なのかを知りたいですか。いま教えてあげます。Pass4Testの1z1-100問題集が最高のツールです。この問題集には試験の優秀な過去問が集められ、しかも最新のシラバスに従って出題される可能性がある新しい問題も追加しました。これはあなたが一回で試験に合格することを保証できる問題集です。


1z1-100試験はOracleの認定試験の一つですが、もっとも重要なひとつです。Oracleの1z1-100の認定試験に合格するのは簡単ではなくて、Pass4Testは1z1-100試験の受験生がストレスを軽減し、エネルギーと時間を節約するために専門研究手段として多様な訓練を開発して、Pass4Testから君に合ったツールを選択してください。


1Z1-820試験番号:1Z1-820
試験科目:「Upgrade to Oracle Solaris 11 System Administrator」
一年間無料で問題集をアップデートするサービスを提供いたします
最近更新時間:2015-01-14
問題と解答:全75問 1Z1-820 試験過去問

>>詳しい紹介はこちら


 
1z1-100試験番号:1z1-100
試験科目:「Oracle Linux 5 and 6 System Administration」
一年間無料で問題集をアップデートするサービスを提供いたします
最近更新時間:2015-01-14
問題と解答:全108問 1z1-100 日本語版と英語版

>>詳しい紹介はこちら


 

もう既にOracleの1Z1-820認定試験を申し込みましたか。「もうすぐ試験の時間なのに、まだ試験に合格する自信を持っていないですが、どうしたらいいでしょうか。何か試験に合格するショートカットがあるのですか。試験参考書を読み終わる時間も足りないですから・・・」いまこのような気持ちがありますか。そうしても焦らないでくださいよ。試験を目前に控えても、ちゃんと試験に準備するチャンスもあります。何のチャンスですかと聞きたいでしょう。それはPass4Testの1Z1-820問題集です。これは効果的な資料で、あなたを短時間で試験に十分に準備させることができます。この問題集の的中率がとても高いですから、問題集に出るすべての問題と回答を覚える限り、1Z1-820認定試験に合格することができます。


Oracleの1Z1-820試験に合格することは容易なことではなくて、良い訓練ツールは成功の保証でPass4Testは君の試験の問題を準備してしまいました。君の初めての合格を目標にします。


購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード:http://www.pass4test.jp/1z1-100.html


NO.1 Examine this extract from the /etc/ssh/sshd_config file:
passwordAuthentication no
What is the effect of this parameter settings on the use of openSSH commands on both the client
and server?
A. Passwords are not required and no ssh-keygen is required either. Only passphrase are required.
B. Client users whose keys are not in the authorized_keys file on the server are unable to use
passwords to authenticate themselves to the server.
C. The ssh daemon does not ask for a password before starting or stopping the sshd service.
D. Client users whose keys are not in the authorized_keys file on the client are unable to use
passwords to authenticate themselves to the server.
Answer: B

Oracle問題集   1z1-100無料更新   1z1-100対策   1z1-100開発入門
Explanation:
If you set PasswordAuthentication to no, you will no longer be able to use a login and password to
authenticate and must use a login and public key instead (if PubkeyAuthentication is set to yes).

NO.2 This MDADM output:
Which two aspects can be determined from this output?
A. A device failed and has been removed from this RAID set.
B. It is no longer possible to write to this RAID set.
C. Read and write performance is no longer optimal on this RAID set.
D. This RAID set was built without a spare device.
E. Only Write performance is no longer optimal on this RAID set.
Answer: A,D

Oracle的中率   1z1-100ブロンズ教材   1z1-100対応

NO.3 Examine the command on its output:
[root@FAROUT ~] # modprobe -v nfs
Insmod /lib/modules/ 2.6.39-100.0.12.e16uek.x86_64 /kernel/fs/nfs_common/nfs_acl.ko insmod
/lob/modules/ 2.6.39
100.0.12.e16uek.x86_64 /kernel/net/sunrpc/auth_gss/auth_rpcgss.ko
Insmod /lib/modules/ 2.6.39-100.0.12.e16uek.x86_64 /kernel/fs/fscache/fscache/ko
Insmod /lib/modules/ 2.6.39-100.0.12.e16uek.x86_64 /kernel/fs/locked.ko
Insmod /lib/modules/ 2.6.39-100.0.12.e16uek.x86_64 /kernel/fs/nfs/nfs.ko
Which two statements are true about the modprobe command?
A. It will load the nfs module if all the modules upon which it depends have been loaded.
B. It displays the dependency resolution for the nfs module and loads all the modules upon which
nfs depends before loading the nfs module.
C. It verifies that the nfs module and all other modules that depend on the nfs module are installed.
D. It displays the dependency resolution that would occur if the nfs module were to be loaded using
modprobe nfs.
E. It only loads the nfs module if all the modules upon which it depends have not been loaded yet.
Answer: A

Oracle保証   1z1-100資格問題集   1z1-100対応受験
Reference: http://redhat.activeventure.com/ 8 /customizationguide/ch-kernel-modules.html (kernel
module utilities)

NO.4 Which two statements are true concerning the installation and configuration of the
bootloader by the Anaconda installer, which is then used to boot Oracle Linux?
A. The Linux Loader (LILO) bootloader may be chosen for installation.
B. The bootloader must be password protected and Anaconda prompts for a password in all cases.
C. The Grand Unified Bootloader (GRUB) is the only bootloader used by Oracle Linux.
D. If previously installed operating systems are found on disk partitions that were not overwritten,
then an attempt is made to configure the bootloader to be able to boot them.
E. The bootloader is installed by default in the first partition of the disk.
Answer: A,E

Oracleディレクトリ同期   1z1-100コマンド   1z1-100予想試験   1z1-100目的   1z1-100サービス   1z1-100クラム
Explanation:
A (not C): Linux boot process from hard drive:
1.PC initializion phase - BIOS, POST.
2.PC starts boot loader - usually grub or lilo.
3.The bootloader locates kernel image on the hard drive.
4.The kernel decompresses and loads itself. Once finished it tries to mount the root filesystem. 5.
When the root filesystem is mounted, /sbin/init is executed and continues booting the system using
inittab and /etc/rc*.d scripts

NO.5 Which two software packages are prerequisites for enabling the configuration and use of a
Network information Service (Nis) client?
A. nis-tools
B. slapi-nis
C. ypbind
D. nisserv
E. nisbind
F. yp-tools
Answer: C,E

Oracle   1z1-100日本語   1z1-100復習資料   1z1-100模擬モード
Explanation:
C: ypbind finds the server for NIS domains and maintains the NIS binding information. The client
(normaly the NIS routines in the standard C library) could get the information over RPC from ypbind
or read the binding files.
E: Setting up a NIS master server:
Required packages: yp-tools ypbind ypserv portmap

NO.6 Which three settings can be controlled by using the chage breemar command as the root user,
to modify the parameters in the /etc/shadow file?
A. The expiration date of the breemar account
B. The number of days after the breemar account is locked, that it becomes expired
C. The maximum number of days that must elapse between password changes by the user breemar
before the password becomes invalid
D. The number of days after the breemar account is locked, that it becomes unlocked
E. The minimum number of days that must elapse between password changes by the user breemar
F. The maximum number of failed login attempts on the breemar account before the account is
locked
Answer: A,C,E

Oracle教本   1z1-100復習問題集   1z1-100練習   1z1-100内容   1z1-100関節
Explanation:
A: chage -E, --expiredate EXPIRE_DATE
Set the date or number of days since January 1, 1970 on which the
user's account will no longer be accessible.
CE: You need to use chage command to setup password aging.
The chage command changes the number of days between password changes
and the date of the last password change. This information is used by the system to determine
when a user must change his/her password.

NO.7 Which four statements are true about software on the Oracle Public YUM server?
A. It contains Oracle Linux installation ISO images.
B. It contains Oracle Linux binary RPM packages.
C. It contains Oracle Linux errata packages.
D. It contains Oracle Linux source RPM packages.
E. It contains beta Oracle Linux software packages.
F. It does not contain Unbreakable Enterprise Kernel packages.
Answer: B,C,D,F

Oracle過去   1z1-100スクール   1z1-100予想試験   1z1-100一発合格   1z1-100日本語講座   1z1-100無料
Explanation:
The Oracle public yum server offers a free and convenient way to install the latest Oracle Linux
packages as well as packages from the Oracle VM installation media via a yum client.
Oracle provides all errata and updates for Oracle Linux via the Public Yum service, which includes
updates to the base distribution, but does not include Oracle-specific software.
F: By default, all new installations of Oracle Linux 6 Update 5 are automatically configured to use the
public yum update service. If you subsequently register the system with ULN, the public yum service
is automatically disabled.

NO.8 Which statements is true concerning Oracle Linux configuration files for users and groups?
A. The /etc/passwd file contains hashed passwords for each user.
B. The /etc/shadow file contains hashed passwords for each user.
C. The GECOS field in /etc/passwd file may be empty.
D. The /etc/group file contains the group name and the hashed group password.
Answer: B

Oracle   1z1-100前提条件   1z1-100   1z1-100無料
Explanation:
/etc/shadow file stores actual password in encrypted (one-way hashed) format for user's account
with additional properties related to user password i.e. it stores secure user account information


nice!(0)  コメント(0)  トラックバック(0) 

nice! 0

コメント 0

コメントを書く

お名前:
URL:
コメント:
画像認証:
下の画像に表示されている文字を入力してください。

トラックバック 0

この広告は前回の更新から一定期間経過したブログに表示されています。更新すると自動で解除されます。