1z0-590全真模擬試験、1z0-485学習教材

君はまずネットで無料なOracleの1z0-590試験問題をダウンロードしてから 弊社の品質を確信してから、購入してください。Pass4Testは提供した商品は君の成功を全力で助けさしたげます。

いつもあなたに最高の1z0-485認定試験に関連する試験参考書を与えられるために、Pass4Testは常に問題集の質を改善し、ずっと最新の試験のシラバスに応じて問題集を更新しています。現在の市場では、Pass4Testはあなたの最もよい選択です。長い間にわたって、Pass4Testは多くの受験生に認可されました。私を信じていないなら、周りの人々に聞いてみてもいいです。Pass4Testの試験問題集を利用したことがある人がきっといますから。Pass4Testは最優秀な試験1z0-485参考書を提供してあなたを試験に合格させることを保証します。

Oracleの1z0-485試験の合格書は君の仕事の上で更に一歩の昇進と生活条件の向上を助けられて、大きな財産に相当します。Oracleの1z0-485認定試験はIT専門知識のレベルの考察として、とっても重要な地位になりつつます。Pass4Testは最も正確なOracleの1z0-485試験資料を追求しています。

試験番号：1z0-590
試験科目：「Oracle VM 3 for x86 Essentials」
一年間無料で問題集をアップデートするサービスを提供いたします
最近更新時間：2014-05-16
問題と解答：全82問 1z0-590 試験過去問

>>詳しい紹介はこちら

 

試験番号：1z0-485
試験科目：「Exadata Database Machine Models X3-2 and X3-8 Implementation Essentials」
一年間無料で問題集をアップデートするサービスを提供いたします
最近更新時間：2014-05-16
問題と解答：全71問 1z0-485 参考書勉強

>>詳しい紹介はこちら

 

今の競争の激しいIT業界ではOracleの1z0-590試験にパスした方はメリットがおおくなります。給料もほかの人と比べて高くて仕事の内容も豊富です。でも、この試験はそれほど簡単ではありません。

進歩を勇敢に追及する人生こそ素晴らしい人生です。未来のある日、椅子で休むとき、自分の人生を思い出したときに笑顔が出たら成功な人生になります。あなたは成功な人生がほしいですか。そうしたいのなら、速くPass4TestのOracleの1z0-590試験トレーニング資料を利用してください。これはIT認証試験を受ける皆さんのために特別に研究されたもので、１００パーセントの合格率を保証できますから、躊躇わずに購入しましょう。

Pass4Testというサイトには全的な資源とOracleの1z0-590の試験問題があります。それに、Oracleの1z0-590の試験の実践経験やテストダンプにも含まれています。Pass4Testは受験生たちを助けて試験の準備をして、試験に合格するサイトですから、受験生のトレーニングにいろいろな便利を差し上げます。あなたは一部の試用問題と解答を無料にダウンロードすることができます。Pass4TestのOracleの1z0-590の試験中に絶対な方法で転送することでなく、Pass4Testは真実かつ全面的な試験問題と解答を提供していますから、当社がオンラインするユニークなのOracleの1z0-590の試験トレーニング資料を利用したら、あなたが気楽に試験に合格することができるようになります。Pass4Testは合格率が１００パーセントということを保証します。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.pass4test.jp/1z0-485.html

NO.1 Changes for Linux system performance optimization
Which of the software changes listed are permitted on Exadata Storage Servers?
A. 1, 2, 3, and 4
B. only 3 '
C. none
D. only 2
E. only 1 and 2
F. only 2 and 3
Answer: E

Oracle教本   1z0-485試験   1z0-485 PDF   1z0-485関節
Explanation:
1. The Storage Server Patch is responsible for keeping our cell nodes always up-todate, fixing
possible problems, and this patch includes different component patches, like kernel patches,
firmware, operation system, etc... for the Storage Server. Incorrect: 3,4: security scan tools changes
and Linux system performance optimization changes would be on the database server.
4. The mpstat output from OS Watcher shows a database node as being 90% idle on an average.
What would you do to get a full picture of CPU utilization on the entire Exadata RAC cluster?
A. Average the mpstat id1 output from all the nodes.
B. Ask application users if they have noticed a slowdown in screen response.
C. Look for an increase in batch job servicing times.
D. A & B above
Answer: A

Oracle問題集   1z0-485初心者   1z0-485学習   1z0-485参考書   1z0-485認定試験

NO.2 Consider the following software changes that are performed manually on a Linux server:
1.Changes for Linux kernel firewall configuration
2.Changes for custom performance monitoring tools
3.Changes for security scan tools

NO.3 Which is the best location to point your customer to, for finding the latest Exadata patches?
A. owner's guide
B. Patch database in MyOracle Support
C. MyOracle Support note 888828.1
D. MyOracle Support for database patches, ULN for OS patches, and Sun Support for Server and
InfiniBand patches.
Answer: B

Oracle参考書   1z0-485ふりーく   1z0-485 vue
Explanation:
Before starting, we would like to share and note here two documents from My Oracle Support, aka
metalink. These notes must be the first place that you need to go to review before patching the
Exadata environment.
* (B) Database Machine and Exadata Storage Server 11g Release 2 (11.2) Supported Versions (Doc ID.
888828.1)
-This is for the second and third generation (V2 and X2) for Oracle Exadata, using Sun hardware.
* Database Machine and Exadata Storage Server 11g Release 1 (11.1) Supported Versions (Doc
ID. 835032.1)
* - This is for the first generation (V1) for Oracle Exadata, using HP hardware.

NO.4 Identify three best practices for applying asmdeactivationoutcome es on Exadata Database
Servers and Exadata Storage Servers?
A. Backing up database servers and storage cells is not recommended before performing planned
maintenance.
B. Database server updates can be rolled back using the the "yum downgrade" procedure.
C. Bundle patches do not require testing before being installed on a production system.
D. It is recommended that Exadata systems with Data Guard configured use the "Standby First"
patching approach.
E. Patching should never be interrupted due to a connection drop. It is therefore recommended that
you use VNC or the screen utility.
F. Before patching cells in a rolling manner, you must check asmdeactivationoutcome amModestatus
and make sure that cells on all disks are online and that disks can be deactivated.
Answer: D,E,F

Oracle学習   1z0-485ふりーく   1z0-485会場   1z0-485ふりーく

NO.5 Exadata Database Machine offers an Intelligent Platform Management Interface for the
various components in the Exadata product. Which option is true?
A. IPMI can be used to remotely start and stop servers.
B. IPMI can be used to remotely log in to the operating system.
C. IPMI commands can be executed by using SNMP traps.
D. IPMI settings can be secured by backing up the Oracle Linux installation on the storage system.
Answer: A

Oracle通信   1z0-485教育   1z0-485テスト   1z0-485テスト   1z0-485書籍
Explanation:
IPMI - short for Intelligent Platform Management Interface - is an interface standard that allows
remote management of a server from another using standardized interface. The servers in the
Exadata Database Machine follow that. It's not an Exadata command but rather a general Linux one.
To power on a cell or database server, issue this from another server: # ipmitool -H prolcel01-ilom
-U root chassis power on
To stop a server, use the shutdown command. To stop immediately and keep it down, i.e. not reboot,
execute:# shutdown -h -y now

NO.6 Which two statements are true about enabling write-back flash cache?
A. When enabling write-back flash cache in a non rolling manner, it is important to ensure that
asmdeactivatonoutcome is set to YES and asmModestatus is set to ONLINE for all grid disks.
B. Before using write-back flash cache, you need to verify the minimum required versions.
C. Before write back-flash cache is enabled, you need to drop the Flash Cache first.
D. The setting flashCacheMode should be set to writeback by updating cellinit.ora and restarting
cellsrv.
E. When enabling write-back flash cache in a rolling manner, dcli should be used to inactivate the
grid disks on all cells first.
Answer: B,C

Oracle認定証   1z0-485認定証   1z0-485番号   1z0-485取得   1z0-485
Explanation:
B: Exadata storage version 11.2.3.2.1 is the minimum version required to use this write back flash
cache option.
C: Steps for Enabling Write back flash cache:
First of all, you don't need the stop CRS or database (This is ROLLING method) ,you can do it cell
by cell.
*drop flashcache
*Be sure asmdeactivationoutcome is YES is before disabling grid disk

NO.7 Consider the following setup:
User A1 belongs to resource group High on Database A.
User B2 belongs to resource group Low on Database B.
User C3 is a user on Database C without any DBRM setup.
DBRM setup:
Database A: Resource group High gets 80% and Low gets 20%.
Database B: Resource group High gets 60% and Low gets 40%.
IORM setup:
Database A: Share=20, limit=5
Database B: Share=30, limit=10
Database C: 5 shares
Total number of shares in the IORM setup = 100
What percent of I/O will each database user theoretically be using when the Exadata storage unit
I/O throughout is used 100% and no other databases but A, B, and C are running?
A. Al = 36%, B2=18%, and C3=9%
B. Al = 33%, B2=33%, and C3=33%
C. AI = 10%, B2=5%, and C3=20%
D. Al = 8%, B2=12%, and C3=5%
E. Al = 5%, B2=10%, andC3=85%
Answer: E

Oracle練習   1z0-485教本   1z0-485試験   1z0-485取得
Explanation:
IORM setup limits Database A to 5%, and Database B is limited to 10%, while
Database C has not IORM limit.
Notethat the resource groups are for CPU allocation.

NO.8 You get a Host Unreachable error when you attempt to connect to a server through a network
terminal command line. What are two other ways in which you can connect?
A. Use the ILOM Web GUI.
B. Use the dcli command at the root prompt on a database node.
C. Attach a terminal device to the back panel of the server with a serial cable.
D. Connect by using SQL *Plus.
E. Log in as root on the database node using the Net1 IP address.
Answer: A,C

Oracleクラムメディア   1z0-485教本   1z0-485試験
Explanation:
In addition to gaining shell access via SSH to manage your Exadata servers, you can also access them
from the Integrated Lights Out Management (ILOM) console or KVM console.
and should typically not require modifications unless you have changed network information inside
your database machine.
Note: A KVM switch (with KVM being an abbreviation for "keyboard, video and mouse") is a
hardware device that allows a user to control multiple computers from one or more[1] keyboard,
video monitor and mouse. Although multiple computers areconnected to the KVM, typically a
smaller number of computers can be controlled at any given time